Used Liebherr A932 Litronic Material Handler 1994 s/n: 360-0555 with new engine and controls on solid rubber tired carrier

Items rebuilt by Mitchell Crane:

Replaced main frame
New engine (16 Hrs.)
Rebuilt jib cylinders
Repack rotating swivel

New turn table bearing
Rebuilt transmission
Replace computer display
Replace electrical swivel

Hydraulic System:

Main Pumps: Liebherr variable flow swash plate pumps, (2) x 60 GPM each @ 4640 PSI max. for travel and attachments.
Swing Pump: Closed loop swing circuit.
One reversible swash plate swing pump produces 48 GPM @ 5568 PSI max.
Pump Regulation: Pressure compensation, Automatic Oil Flow Optimizer.
Hydraulic Tank capacity: 74 gals.
Hydraulic system capacity: 137 gals.
Hydraulic Oil Filter: (1) full flow filters in return line.
Hydraulic Oil Cooler: Stacked with engine radiator, one on top of another, providing maximum cooling for both engine and hydraulic systems.

Engine Specifications:

Engine: Liebherr D914TI, 4 cylinder in line, water-cooled, turbo charged, direct injection Diesel Engine producing 168 HP at 2000 RPM.
Fuel Tank: 103 gals. Estimated fuel consumption 4.2 to 6 gal/hr. Varies with application.
Electrical system: 24 Volt (2) 110 Ah/12 v. batteries. 24-volt/35-amp alternator.

Swing drive:

Hydraulic motor: Liebherr swash plate motor with integrated brake valves.
Transmission: Liebherr planetary reduction gear.
Swing Ring: Liebherr, sealed single race ball bearing swing ring, with internal teeth
Swing speed: 0 - 7.5 RPM
Swing Brake: Pedal controlled positioning brake, wet discs.


Power distribution via control valves with integrated primary and secondary safety valves.
Flow summation to Boom and Stick.
Proportional joystick servo circuits for boom, stick, grapple open & close and swing. Grapple rotate functions are electrical buttons on the joysticks.
Load holding valves on stabilizer cylinders and main boom as standard safety feature.


42' (23' boom, 19' 8" stick)

Operators cab:

Fixed elevated cab riser (4 ft), resiliently mounted cab, sound insulated, large windows for 360 visibility, front window stores overhead.
Comfort and productivity are primary focus as operator's seat is fully adjustable, body contoured with shock absorbing suspension, adjustable to operator's weight. Operator's controls are integrated into control panel., independently adjustable from seat.


Liebherr manufactured undercarriage with four hydraulic outriggers, (8) 12.00-20 tires. Drive powered by a variable displacement Liebherr piston motor via a two-speed power shift transmission with additional creeper speeds, differential gears and planetary reduction gears incorporated into each wheel hub. The wet multi-disc travel brakes are protected inside the wheel hubs. 50 ton axles.

Machine operation weight:

63,000 lbs.